KXT-F Rubber Joint with Tie Rod

The limit rubber joint has good comprehensive performance, it is widely used in chemical, construction, water supply, drainage, petroleum, light and heavy industry, refrigeration, sanitation, plumbing, fire protection, electric power and other basic projects. KXT-F type rubber joint is specially used for cold water, hot water, compressed air, natural gas, etc. It has a unique design, novel structure and good sealing performance to deal with pipeline bursting and damage to pipeline connection equipment caused by thermal expansion and contraction, effectively The improvement of the service cycle of the pipeline and the maintenance of the equipment.

Anti-pull installation in rubber joint:

The whole body of the rubber joint is made of rubber, and the characteristics of rubber make it have the characteristics of good elasticity, high compression resistance, and adaptability to harsh environments in various regions by changing various rubbers. Regarding this new product, we are developing from time to time, And it also stopped the compensation, and designed various accessories for the rubber joint to make it work better. The anti-pull installation of the rubber joint is one of the creations.

When the single-sphere rubber joint is installed, if the deflection distance of the pipeline is large and the pressure demand is also large, it is necessary to install the single-sphere rubber joint with anti-pulling limit installation. The tensile length of the spherical rubber joint is fixed at one point, and at the same time, it also greatly reduces the external pressure, which has a good maintenance effect on the single spherical rubber joint. Beyond the extreme point of the tensile length of the single sphere rubber joint, the company proposes to use the double sphere rubber joint. The reason why the double sphere is not installed with the anti-pull under normal conditions is that the length of the double sphere is not suitable, because it has sufficient tensile length and its compressive capacity is not ideal, so instead of installing the double sphere rubber Connector, it is better to find another shortcut.

In addition to the single ball rubber joint, the anti-pull installation is also suitable for the flanging rubber joint. The flanging rubber joint itself has a good anti-pull ability. The reason is that its two ends are exquisitely designed. The blue sheet is completely close to his two ends, so the probability of being pulled is greatly reduced, but there are always some areas, so about the pulling phenomenon, the flanged rubber joint still has to be protected, and the ability to prevent pulling itself is necessary. The large flanged rubber joint is installed on the anti-pull installation, which will make it have complete anti-pull ability, but this is a special rubber joint, so it is not too common.